Guillotine Shears

Price: Not specified

Financing
New/Used: New
Category: Guillotine Shears
Sheetmetal Working Machines
Industrial Machinery

Reference no: Gradsax Knuth 2
Posted: 2023-05-08
Timo Paajanen
VD
070-566 47 00

Description

KMT S 2054 NC motorized shear
Machine Frame and Drive System

The machine frame is made of a very rigid, solid steel weldment
The upper knives are reversible for use of both sides, and the lower knives feature 4 cutting edges
A rigid, continuous hold-down fixes the sheet metal plate right in front of the cut line
The optimum kerf for machining can be adjusted manually
Material Support

The rigid side angle stop simplifies alignment of the plate to the cut line
Rugged support arms ensure a strong hold of large plates
Material support rollers are recessed in the table for easy workpiece handling
Ergonomic Design

The mobile foot switch gives the operator added flexibility and both hands are free for handling the workpiece
For a better view of the cut line, the hand safety guard can be flipped up or down
The bright LED illumination of the cut line creates a clearly visible shadow on the marked line
Rear stop:

The motorized back gauge ensures precise positioning in automatic, semi-automatic and manual modes
The NC-controlled back gauge can be easily and quickly programmed
The easy accessible work area at the back gauge is secured by light curtain
The machine can be equipped with an optional NC-controlled back gauge for a length up to 1000 mm, or a sheet hold-up device

Properties

Encoder signal between 5 VDC and 30 VDC
Toggle between inch/metric
Measuring range 0 - 10 m
0,1 mm sensitivity (adjustable)
Automatic, semi-automatic operation and manual mode can be selected
Up to 10 positions can be saved
Optional expansion for up to 100 programs with 10 adjustable values each
Machining in single mode is possible as well
Stroke can be limited on both sides
Dual positioning speed
Warnings and error message display
Programmable push buttons
Retraction is possible during the cutting process
Saves the set position values and counts upon shut-down
Standard Equipment
operator instructions
foot pedal
light curtain
lateral stop
motorized rear stop (750 mm)
cut-line lighting
Full length flip-up finger guard
manual blade gap adjustment
top blade with 2 sides
ball bearing front table
support arms with T-slots and tilting stop
BRL NC controller

Price: Not specified

Financing

General

MakeKNUTH

Send notice of interest

Recipients
Contime Consulting S, Timo Paajanen
Subject
Message

Sender

Company name
Name
Email
Phone
By clicking "Send message" you agree that we save your personal information according to current terms
Would you like to receive mailings from industritorget.com?
Send me a copy of the message.
Contact information
Mailing address
Hamn­vägen 65
95395 Nikkala
Visiting address
Hamn­vägen 65
SE-95395 Nikkala
Region
Haparanda
Norrbottens county
Sweden
Organization id:
451010-9715
Founded: 1984
Employees: Not specified
English description is missing, swedish description below.

Välkommen till Contime Consulting S = Sverige och Contime Consulting F =Finland

Contime har att erbjuda ett stort sortiment av nya och begagnade verkstads- , plåt- och snickerimaskiner.
Vi har specialiserat oss på tunnplåtsmaskiner samt små och mellanstora verkstadsmaskiner av hög kvalitet.

Tveka inte att kontakta oss vi har över 50 års erfarenhet av allt vi säljer.
Vi kan även hjälpa till med bemanning vid behov av Svetskunniga resemontörer även licenssvetsare med flera årig yrkesvana vid Basindustrin i Hela Norden. Stålverk,Pappersbruk,Gruvindustrin mm.

Vi erbjuder professionell hjälp vid beräkning av anbud.
Specialitet: Venttilations anläggningar för industrin.Även montage ledning och montörer vid behov.Hör efter med oss.

Vi utför även värderingar och besiktningar inom branschen.

Välkommen att kontakta oss!

Innehar F-Skattsedel
Ny öppnat Butik och lager Välkommen
Contime Consulting S
Kranvägen 1
953 33 Haparanda

Agents

Jäckle, Germany (General agent)
Svetsmaskiner
Jk-Kone, Finland (General agent)
Plåtmaskiner
Merkle, Germany (General agent)
Svetsmaskiner
Wallius OY, Finland (General agent)
Svetsmaskiner

Contacts

Timo Paajanen
070-566 47 00