Guillotine Shears

Price: Not specified

Financing
New/Used: New
Category: Guillotine Shears
Sheetmetal Working Machines
Industrial Machinery

Reference no: Knuth gradsax 1
Posted: 2023-05-08
Timo Paajanen
VD
070-566 47 00

Description

Machine Frame and Drive System

The machine frame is made of a robust steel weldment treated with stress-relief annealing
An automatic hold-down fixates the plate during cutting
The double-edged upper and lower knives can be rotated and reused
Material Support

The rigid side angle stop simplifies alignment of the plate to the cut line
Operation and Ergonomics

The PLC back-gauge control with 4.3" touchscreen features a user-friendly graphic interface for quick and easy programming
The mobile control unit features a foot switch, so the operator has both hands free
Back Gauge

The backgauge is driven by a servo motor, which significantly improves positioning and repeatability accuracy
A plate hold-up fixture prevents any overhang of the plate in front of the back gauge to ensure maximum accuracy and quality of every cut, even in thin plates
Support arms are positioned via an air cylinder and lowered in sync with the cutting process
Standard Equipment
work lamp
operator instructions
foot pedal
powered rear stop
lateral stop
pcl control
safety guard with power off after open door
pneumatic sheet hold-up device
cut-line lighting
hold-down
Back gauge with 4,3" Touchscreen
Support arms with material support balls
Safety cover Working area Backgauge

Technical Data
Working area
Structural steel plate thickness 0,8 - 2 mm
Working length 2.550 mm
Cutting angle 1,6 deg
Strokes per minute (automatic mode) 30 H/min
Knife length 2.570 mm
Work table height 830 mm
Support arms 600 mm
Number of support arms 5 Pieces
Back Gauge
Rear stop 630 mm
Drive capacity
Motor rating main drive 4 kW
Measures and weights
Overall dimensions (length x width x height) 3x1,78x1,24 m
Weight 1.900 kg

Price: Not specified

Financing

General

MakeKNUTH

Send notice of interest

Recipients
Contime Consulting S, Timo Paajanen
Subject
Message

Sender

Company name
Name
Email
Phone
By clicking "Send message" you agree that we save your personal information according to current terms
Would you like to receive mailings from industritorget.com?
Send me a copy of the message.
Contact information
Mailing address
Hamn­vägen 65
95395 Nikkala
Visiting address
Hamn­vägen 65
SE-95395 Nikkala
Region
Haparanda
Norrbottens county
Sweden
Organization id:
451010-9715
Founded: 1984
Employees: Not specified
English description is missing, swedish description below.

Välkommen till Contime Consulting S = Sverige och Contime Consulting F =Finland

Contime har att erbjuda ett stort sortiment av nya och begagnade verkstads- , plåt- och snickerimaskiner.
Vi har specialiserat oss på tunnplåtsmaskiner samt små och mellanstora verkstadsmaskiner av hög kvalitet.

Tveka inte att kontakta oss vi har över 50 års erfarenhet av allt vi säljer.
Vi kan även hjälpa till med bemanning vid behov av Svetskunniga resemontörer även licenssvetsare med flera årig yrkesvana vid Basindustrin i Hela Norden. Stålverk,Pappersbruk,Gruvindustrin mm.

Vi erbjuder professionell hjälp vid beräkning av anbud.
Specialitet: Venttilations anläggningar för industrin.Även montage ledning och montörer vid behov.Hör efter med oss.

Vi utför även värderingar och besiktningar inom branschen.

Välkommen att kontakta oss!

Innehar F-Skattsedel
Ny öppnat Butik och lager Välkommen
Contime Consulting S
Kranvägen 1
953 33 Haparanda

Agents

Jäckle, Germany (General agent)
Svetsmaskiner
Jk-Kone, Finland (General agent)
Plåtmaskiner
Merkle, Germany (General agent)
Svetsmaskiner
Wallius OY, Finland (General agent)
Svetsmaskiner

Contacts

Timo Paajanen
070-566 47 00