MM 8 - Hydraulic motor with rear ports

Price: 2,315 SEK
 (excl. vat)

Financing delivery_truck_speedBook shipping
New/Used: New
Category: Other
Hydraulics
Products

Reference no: MM08
Posted: 2022-12-12
Jesper Gram
Direktör
+45 24488480
Manju Lund Hansen
Salg
45 24488480

Description

MM 8 - Hydraulic motor with rear ports

Hydraulic motor with rear ports. 1/4" BSP
Three Bolts Mount
Shaft Ø16 - Standard straight shaft with keyway.
Minimum speed: 20 RPM.
Size: 8 CC
Torque: 15 Nm


DISTRIBUTOR VALVE

MM series motors have spool valve: the distributor valve has been integrated with the output shaft. The cardan shaft rotates distributor valve and transfers mechanical energy from gerotor set to output shaft. The valve has hydrodynamic bearings and has infinite life when load ratings are not exceeded.



GEARWHEEL SET

Gerotor set has plain teeth. These type of motors are suitable for long operating periods at moderate pressures or short operating periods at high pressures.



This motors are suitable for hydraulic systems with series-connected motors with demands for low leakage. low low speed (up to 200 min ) speed while maintaining high torque. They are designed to run continuously at at normal pressure drop and reduced flow. Optimal run is guaranteed at frequency of rotation from 20 to 50 min . Motors with this valving have an increased starting pressure and are not recommended for using at pressure drop less than 40 bar.



Orbit motors convert hydraulic energy (pressure, oil flow) into mechanical energy (torque, speed). Hydraulic orbit motors operate on the principle of an internal gear (rotor) rotating within a fixed external gear (stator). The internal gear transmits the torque generated by the application of pressure from hydraulic oil fed into motor which is then delivered via the motor's output shaft. Orbit motors have high starting torque and constant output torque at wide speed range. hydraulic motors are designed to operate at the whole standard range of working conditions (pressure drop and frequency of rotation), but with considerable decreased volumetric losses in the drain ports.

Price: 2,315 SEK
 (excl. vat)

Financing

General

MakeTAON Hydraulik
Make (year)2022

Other

Terms of deliveryEXW

Send notice of interest

Recipients
TAON Hydraulik Komponenter Aps, Jesper Gram
Subject
Message

Sender

Company name
Name
Email
Phone
By clicking "Send message" you agree that we save your personal information according to current terms
Would you like to receive mailings from industritorget.com?
Send me a copy of the message.

Contact information

TAON Hydraulik Komponenter Aps

Mailing address
Jernet 25
6000 Kolding
Visiting address
Jernet 25
6000 Kolding
Region
Denmark
Organization id:
DK33395647
Founded: 2011
Employees: Not specified
Welcome to TAON Hydraulik Komponenter Aps

TAON Hydraulics offers hydraulic solutions, components and technical support for a wide range in the industrial field

TAON is an engineering company, specialized in hydraulics.

TAON Hydraulic Components ApS was founded in 2011 with a main focus on hydraulic valves and pumps. Today, we are a company with a complete range of hydraulics – both selling components and developing solutions. We manufacture hydraulic power packs, proportional valves and total solutions. Likewise, we sell components and spare parts all over the world, especially in Scandinavia.

arrow_downwardSee below for more information about our business.

Contacts

Jesper Gram
CEO
+45 24488480
Manju Lund Hansen
Salg
45 24488480
Iben Mathiesen
+45 22408480

Videos

TAON Hydraulic

call