Gr. 2 - Gear motor - 8,2 cc

Price: 2,681 SEK
 (excl. vat)

Financing delivery_truck_speedBook shipping
New/Used: New
Category: Other
Hydraulics
Products

Reference no: 20MR8,2X546
Posted: 2022-12-13
Jesper Gram
Direktör
+45 24488480
Manju Lund Hansen
Salg
45 24488480

Description

Gr. 2 - Gear motor - 8,2 cc - stocked in many sizes and variants
Gr. 2 Euro flange - Speed: 650-3500 rpm. - Reversible: Can rotate in both directions

A gear motor (external gear) consists of two gears, the driven gear (attached to the output shaft by way of a key, etc.) and the idler gear. High pressure oil is ported into one side of the gears, where it flows around the periphery of the gears, between the gear tips and the wall housings in which it resides, to the outlet port. The gears then mesh, not allowing the oil from the outlet side to flow back to the inlet side. For lubrication, the gear motor uses a small amount of oil from the pressurized side of the gears, bleeds this through the (typically) hydrodynamic bearings, and vents the same oil either to the low pressure side of the gears, or through a dedicated drain port on the motor housing, which is usually connected to a line that vents the motor's case pressure to the system's reservoir. An especially positive attribute of the gear motor is that catastrophic breakdown is less common than in most other types of hydraulic motors. This is because the gears gradually wear down the housing and/or main bushings, reducing the volumetric efficiency of the motor gradually until it is all but useless. This often happens long before wear causes the unit to seize or break down.

Price: 2,681 SEK
 (excl. vat)

Financing

General

MakeTAON Hydraulik
Make (year)2022

Other

Terms of deliveryEXW

Send notice of interest

Recipients
TAON Hydraulik Komponenter Aps, Jesper Gram
Subject
Message

Sender

Company name
Name
Email
Phone
By clicking "Send message" you agree that we save your personal information according to current terms
Would you like to receive mailings from industritorget.com?
Send me a copy of the message.

Contact information

TAON Hydraulik Komponenter Aps

Mailing address
Jernet 25
6000 Kolding
Visiting address
Jernet 25
6000 Kolding
Region
Denmark
Organization id:
DK33395647
Founded: 2011
Employees: Not specified
Welcome to TAON Hydraulik Komponenter Aps

TAON Hydraulics offers hydraulic solutions, components and technical support for a wide range in the industrial field

TAON is an engineering company, specialized in hydraulics.

TAON Hydraulic Components ApS was founded in 2011 with a main focus on hydraulic valves and pumps. Today, we are a company with a complete range of hydraulics – both selling components and developing solutions. We manufacture hydraulic power packs, proportional valves and total solutions. Likewise, we sell components and spare parts all over the world, especially in Scandinavia.

arrow_downwardSee below for more information about our business.

Contacts

Jesper Gram
CEO
+45 24488480
Manju Lund Hansen
Salg
45 24488480
Iben Mathiesen
+45 22408480

Videos

TAON Hydraulic

call